Contact Information

7154 N University Dr #95,
Tamarac, FL 33321, USA

We Are Available 24/ 7. Email Us.

I live in a creaky old house that’s in constant need of repair. The electric drill that came with the place, ah, looks like it was used to build the place. It has a power cord that’s just barely holding together through a combination of duct tape and anxiety. Two electrical shocks, a blown fuse and several delightful new curse words into my first home improvement project, I was convinced to get with the 21st century and purchase a cordless drill. Way too many YouTube tool-review rabbit holes, three trips to my local Ace Hardware and one exhaustive excel spreadsheet after that, I’d found the drill I would buy.

Now, DIYers have more choice than ever when it comes to battery-powered electric tools. Makita, Ryobi, Bosch, Black and Decker, Milwaukee, Kobalt, and Rigid all make solid products but I opted for the DeWalt 20V 1/2-inch cordless drill. Let me tell you why.

First off, the price was right. The DCD771C2 comes bundled with a pair of 1.3Ah 20V batteries, charging base and storage case for $160 MSRP, though since April when I first started looking, I have yet to not see it on sale for under $100. I bought mine during Home Depot’s Memorial Day sale along with a 16-piece screwdriver bit set for $120 out the door. You can also find them at Lowes, Ace stores and on Amazon.

Second, it offered the features I needed with a 20V power level I could handle. Sure I could have opted for the heavy-duty DCD991P2 — probably even eventually convinced myself I had need for a commercial-duty DCH614X2. But in reality, I’m mostly installing banisters, building trellises and doing light handiwork, not installing siding or anchoring things into concrete, so a 60V rotary hammer would be overkill.

My DCC771C2 weighs a little under four pounds, with most of the mass at the bottom of the unit where the battery sits. It outputs 300W (530 in-lbs torque), the two-speed transmission switches between 0 – 450 and 1,500 RPM while the 16-stop clutch lets me fine tune the amount of torque the drill exerts. With it, I can just as easily screw a fire alarm bracket into drywall as I can bore holes through a pressure-treated 4×4.

Third, I really like DeWalt’s 20/60 FlexVolt battery system and it’s a big part of why I went with that brand. DeWalt makes a variety of power tools that largely work off 20V for light duty stuff like string trimmers, drills, circular saws and routers, and 60V for medium-duty gear like chainsaws, lawnmowers, grinders and impact drivers. If I own a 20V drill and buy a 60V lawn mower, I’d normally be stuck buying separate 20V and 60V batteries, separate 20V and 60V chargers — basically doubling up because the two systems have incompatible power units. With FlexVolt, all of the batteries are 60V max but their output can be stepped down to accommodate a 20V system. This way, I just need one set of batteries and a single charger. And even if I stick with just 20V tools, the FlexVolt batteries can reportedly deliver longer runtimes in 20V than the regular 20V Max batteries can.

Of course, a pair of DeWalt’s non-FlexVolt 1.3Ah “20V Max” batteries came with my drill, and I can go buy larger capacity batteries (up to 12Ah) if I need them — but they won’t work on a 60V tool, just as a 60V battery won’t work in my 20V drill. All of which means I’ll have to eventually spring for a FlexVolt charger once I expand my power tool menagerie.

All products recommended by Engadget are selected by our editorial team, independent of our parent company. Some of our stories include affiliate links. If you buy something through one of these links, we may earn an affiliate commission.

Source link



Leave a Reply

Your email address will not be published. Required fields are marked *